E-flite Park 480 Outrunner Brushless, 910Kv

This motor is ideal for 3D park flyers 20-to 30-ounce and scale park flyers 25-to 35-ounce, or models requiring up to 250 watts of power.

Requires:

• 20A to 35A Brushless ESC
• 10x6 to 12x6 Prop
• 7.4V or 11.1V Li-Po or 6-10 cell Ni-Mh/Ni-CD

Features:

• High Torque, direct drive alternative to inrunner brushless motors
• Includes mount, prop adapter, and mounting hardware
• 4mm shaft can easily be reversed for alternative motor installation
• High quality construction with ball bearings and hardened steel shaft
• Slotted 12-pole outrunner design

Specifications:

• Type: brushless
• Size: Park Flyer
• Bearings or Bushings: Bearings
• Wire Gauge: 16
• Recommended Prop Range: 10x7 to 12x6
• RPM/Volt (Kv): 910 (RPM per volt)
• Resistance (Ri): 0.08 Ohms
• Idle Current (Io): 0.85 @ 8V
• Shaft Diameter: 4mm (0.16 in)
• Weight: 3.1 oz (87g)
• Diameter: 1.4 in (35mm)
• Lenght: 1.3 in (33mm)
• Continuous Current: 20A
• Maximum Burst Current: 25A for 15 seconds
• Cells: 6-10 NiCd/NiMh or 2- to 3-cell  LiPo
• Speed Control: 20A to 35A Brushless