E-flite Six-Series Brushless 2700Kv Motor (28mm)

Key Features:

• Perfect match for 3D and aerobatic models 28- to 35-ounces (790- to 990-grams) using a gearbox
• Ideal for scale park flyers 25- to 40-ounces (710- to 1140-grams) using a gearbox
• Ideal direct drive motor in models 18- to 28-ounces (510- to 800-grams)
• Ideal for models requiring up to 400 watts of power
• Perfect upgrade for brushed 400 and 480 motors with same diameter and mounting hole pattern
• High Torque, 6-pole slotted rotor design
• Includes connectors, prop adapter, and mounting hardware
• High quality construction with ball bearings and hardened steel 3.2mm shaft

Overview:

Six-Series Brushless 6-pole motors are high torque motors suitable for either direct drive or geared or geared applications. They feature the same diameter and mounting hole pattern as brushed 400 and 480 motors so they make excellent upgrades for these classes of models. Six-Series motors are ideal for direct drive applications such as hotliners and other LMR products 18- to 28-ounces. They are also ideal for 3D and aerobatic models weighing 28- to 35-ounces, and for scale park flyers weighing 25- to 40-ounces, when using a gearbox. This is a perfect match for aerobatic and 3D models like the E-Flite Brio 10 (EFL2275) when using a gearbox, and pylon racers and hotliners when used direct drive.

Specifications:

• Type: 6-Pole Inrunner
• Size: 400 / 480 Upgrade
• Bearings or Bushings: Ball Bearings
• Recommended Prop Range: 5 x 4 to 6 x 5.5 direct drive or 10 x 6 to 12 x 6 with 2:1 to 3:1 gearbox
• Voltage: 7.2 - 12
• RPM/Volt (Kv): 2700
• Resistance (Ri): .03 ohms
• Idle Current (Io): 2.05A @ 10V
• Continuous Current: 34A
• Maximum Burst Current: 42A (15 sec)
• Cells: 6-10 Ni-MH/Ni-Cd or 2-3S Li-Po
• Speed Control: 35A - 45A Brushless
• Weight: 80g (2.9 oz)
• Overall Diameter: 28mm (1.10 in)
• Shaft Diameter: 3.17mm (1/8 in)
• Overall Length: 36mm (1.40 in)

Needed to Complete:

• 35A - 45A Brushless ESC
• 6-10 Cell Ni-MH/Ni-Cd or 2-3S Li-Po
• 5 x 4 to 6 x 5.5 direct drive or 10 x 6 to 12 x 6 Props with 2:1 to 3:1 gearbox