Loading... Please wait...

Our Newsletter

Futaba S3150 Slim Digital Servo

  • Image 1

Product Description

Futaba S3150 Slim Digital Servo
Futaba S3150 Slim Digital Servo Designed for aileron applications on gliders, jets, and electric planes. This servo can produce high-current draw from your batteries. If using NiMH or Li-Po batteries, make sure they are capable of delivering sufficient Amps. Features: Coreless motor 2 ball bearings Digitally enhanced microprocessors cut about half the response time from transmitter input to servo reaction Dust and water resistant-not water proof Compact design is especially suited for easy installation inside the wing of smaller gliders, jets and electric planes. Black plastic case One year warranty Includes: One S3150 Digital Slim Digital Servo, one 1" (26mm) star shaped horn, one 1.5mm (39mm) star shaped horn, one 1.8" (45mm) straight arm, one 1.4" (35mm) diameter horn, two each-screws, eyelets, and grommets Specifications: Speed: 0.25 sec/60 deg @ 4.8V Torque: 51.4 oz-in @ 4.8V Dimensions: 1.10x0.43x0.80 in (28x11x19.7mm) Weight: 0.78 oz (22g) Power Supply: 4.8V (Futaba does NOT recommend using 6V) Comments: S3150 Digital Servo Precautions, It is best to avoid long leads and Y-harnesses especially with standard grade wires. If problems are encountered, consider using heavy duty wire minimizing lead lengths, and/or removing Y-harnesses. Current Drain: This digital servo is specially designed for high-torque or high-speed, therefore very high current drain is normal at startup. For ultimate performance when using this servo please review the following points. Radio systems with the Battery Fail Safe function have a higher cut-off voltage setting which will cause shorter operation time. When installing the servo, please check pushrod linkage to make sure there is no binding in order to prevent excessive power consumption and decrease the life of the motor and battery. A note on coreless motors. A conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a coreless design, the armature uses a thin wire mesh that forms a cup that spins around the outside of the magnet eliminating the heavy steel core. This design results in smoother operation and faster response time. This digital servo cannot be used with the following * AM * transmitters as the servo neutral signal is: 1310us). CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terra-top, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series. **** Otherwise they will work fine with current AM systems *****

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Futaba S3150 Slim Digital Servo to your wish list.

You Recently Viewed...