Loading... Please wait...

Our Newsletter

Hobbico Digital Voltmeter MK III HCAP0356

  • Image 1

Product Description

Hobbico Digital Voltmeter MK III HCAP0356
Hobbico Digital Voltmeter MK III This is a Digital Voltmeter MkIII from Hobbico. Tests 4, 5 & 8 cell R/C batteries in a no-load or a simulated R/C load setting. Features: Custom designed LCD shows voltage in clear 1/2" numerals, plus customized characters to easily determine the meter setting and condition of the battery under test. The LCD not only displays the voltage, but the voltage mode, "OK" and "RECHARGE". Test 5 cell packs, in addition to 4- and 8-cell batteries. Includes a common 9V internal battery, located inside an easy-access compartment. Built-in simulated R/C load of 250mA for each setting. Includes two input controls: a small pushbutton on the left side of the case, and a 3-position slide switch on the face of the meter. Switch load OFF and use it as a true Digital Voltmeter. Measures DC voltage up to 19.99V, making it versatile enough for any DC battery - transmitter/receiver packs, starter batteries, and glow starter batteries. A 10 minute auto-timer shuts the unit OFF automatically if left ON by accident, to help prevent unwanted battery drain. Rubber grip for no-slip handling. Color coded banana jacks, compatible with most common test leads. One year limited warranty. Includes: One Digital Voltmeter MkIII with 9V battery pre-installed One Instruction Sheet Requires: Test or charge leads with banana plugs such as the Hobbico pre-assembled test and charge leads (HCAP0101 HCAP0110) HCAP0101 FUTABA J Tx/Rx CHARGE LEADS (NOT FOR 9VAP) HCAP0102 FUTABA J Tx/Rx CHARGE LEADS 9VAP ONLY HCAP0104 OLD AIRTRONICS Tx/Rx CHARGE LEADS HCAP0105 JR Tx/Rx CHARGE LEADS HCAP0106 HITEC/AIRTRONICS Z Tx/Rx CHARGE LEADS HCAP0107 CHARGE LEAD GLOW-STARTER - ALL HCAP0108 CHARGE LEAD W/ ALLIGATOR CLIP(2) HCAP0109 VOLTMETER TEST PROBES (2) HCAP0110 CHARGE LEADS 9V Tx PLUG and FUT J Rx Comments: The modeler may purchase the preceding pre-made Rx and Tx connector. However, you CANNOT test diode-protected Tx packs with voltmeters through the radio charge jack. The pack MUST BE REMOVED from the transmitter to get an accurate voltage reading. Modelers can make their own connectors by purchasing one HCAP0310 Banana Plugs, One ASCC4181-16 Gauge Wire, and their radio connector. For the older Futaba radios with "G" plugs, the customer will need to purchase one FUTM4210-Rx charge cord and one HCAP0310. Specifications: Supply voltage: 9V DC Input test settings under load: 4.80V DC (4 cell battery) 6.00V DC (5 cell battery) 9.60V DC (8 cell battery) Optional load current: 250mA each setting Maximum voltage measurement: 19.99V DC Length: 4.5" (113mm) Width: 2.75" (67mm) Height: 1.0" (27mm) Weight: 4.7 oz (136g) Auto-off timer: Shuts OFF after 10 minutes Low battery indicator: Battery symbol in LCD window

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Hobbico Digital Voltmeter MK III HCAP0356 to your wish list.

You Recently Viewed...